ISP3010 series - Built-in Antennas Ultra Wide Band & Bluetooth Low Energy Combo Module (*)

UWB and Bluetooth 5 / ANT+ / NFC Ultra Accurate Positioning Module

(*) NOT RECOMMENDED FOR NEW DESIGN
These modules are not in mass production, several certifications are pending

IEEE802.15.4-2011 UWB compliant (*)
Bluetooth LE 5.0 (*)
NFC-A Tag for OOB pairing
ANT/ANT+ stack available
Spatial resolution better than 10 cm
Fully integrated UWB & BLE matching and Antennas
Integrated UWB 38.4 MHz and BLE 32 MHz & 32.768 kHz Clocks
DC/DC converters
UWB section based on DecaWave DW1000
BLE section based on Nordic Semi nRF52
UWB application controlled by the embedded
32-bit ARM Cortex M4F CPU

14.0 x 14.0 x 1.5 mm

Module Variants

Despite its small size of 14.0 x 14.0 x 1.5 mm, the ISP3010 module integrates the DecaWave DW1000 chipset which is an Ultra Wide Band transceiver dedicated to indoor localisation applications. This chipset needs an external processor to operate and Insight SiP decided to integrate the Nordic Semi nRF52 SoC. In addition to the powerful ARM Cortex M4F MCU, this chip also provides a BLE and NFC connectivity for wireless set up and control of the UWB chip.

ISP3010 differentiate from other module by integrating a multi band antenna in the package, to support both BLE frequency band at 2.4 GHz and UWB frequency band at 6.5 GHz. This is a new and unique concept developed by Insight SiP within a SIP package. In addition, this module also integrates all passives, crystals and DC/DC converters to optimize the power consumption for longer life time when operating on batteries.

ISP3010 module offers the perfect stand-alone ranging solution for short range security bubble applications, for standard location applications requiring typically 50 meters range from module to module, or even longer distance application when the ISP3010 is used in conjunction with optimized UWB anchor antennas.

ISP3010-UX

512 kB Flash and 64 kB SRAM
18 GPIOs including ADC, SPI, UART, PDM, I2C

Development Tools

In order to assist clients in developing their UWB + BLE Smart solutions based on the ISP3010, Insight SIP offers Test Boards, proposed as stand alone PCBs, or included in Evaluation Boards which provide full hardware and software development environment.

Development Kit

Contents

One Interface Board with integrated J-Link OB JTAG/SWD Emulator
One Test Board with ISP3010 module
One NFC Antenna
A ranging demonstration including 1 anchor board, 1 tag board, the embedded firmware and the Android App
Cables

Ordering information

ISP3010-UX-DK

Test Board

Contents

One Test Board with ISP3010 module
and IO connections

Ordering information

ISP3010-UX-TB

Anchor Board

Contents

One Anchor Board with ISP3010 module

Ordering information

ISP3010-UX-AN

Tag Board

Contents

One Tag Board with ISP3010 module

Ordering information

ISP3010-UX-TG

Demo Application

ISP3010 RF module for ranging applications

The module combines UWB and BLE capabilities and includes 2 antennas and MCU. It enables precise localisation for range up to 50m, accurate to within 10cm. For 50m+ range, it is possible to combine with external UWB antennas. The demo uses solo tag in positioning solutions.