Bluetooth Low Energy Modules for Short Range Networking
Bluetooth Low Energy Modules (BLE) from Insight SIP are perfectly suited for devices requiring low cost and low power wireless connectivity. Our compact and energy-efficient BLE modules are based on chips from Nordic Semiconductor and the successive iSP15, iSP18, iSP19 and iSP20 generations offer a comprehensive range of smallest 8.0 x 8.0 x 1.0 mm pin to pin compatible packages. All modules integrate the antenna, the RF matching circuit, all decoupling and load capacitors plus crystal oscillators. The antenna was designed to be compatible with several end applications, illustrating Insight SiP’s expertise in RF and Front End miniaturization and antenna integration.
The modules are specifically designed for PC, smart phone peripherals, IoT smart objects and M2M applications in following fields: domotic / home automation, fitness, healthcare, industrial, sport, wearable devices, etc. Ultra low power consumption and advanced power management enables battery lifetimes up to several years on a coin cell battery. All our modules are full certified by the Bluetooth SIG and by global regulatory bodies such as the FCC, CE, Telec, etc.
iSP 24 - 25 - 26 series - Bluetooth 6.0, Mesh, Thread and Matter Modules with Embedded Antenna
ISP2654
This ultra-compact LGA module, 8 x 10 x 1 mm, is based on the ultra-low power nRF54H20 chip ...
LEARN MORE > ISP2554
This ultra-compact LGA module, 8 x 8 x 1 mm, is based on the ultra-low power nRF54LM20A ...
LEARN MORE > ISP2454
This ultra-compact LGA module, 8 x 8 x 1 mm, is based on the ultra-low power nRF54L15 chip ...
LEARN MORE >
One of the basic problems with existing Bluetooth location technology such as Bluetooth Beacons and Bluetooth Angle of Arrival is that Bluetooth channels are narrow band. There are 39 channels, each with a bandwidth of 1Mhz, each separated from the adjacent one by a 1Mhz gap. A narrow band signal means that pulses are not well defined in time, and therefore determining information about phase or timing will have limited precision.
With Bluetooth Channel Sounding, a total of 76 channels on a 1 MHz spacing are used across a total bandwidth of 80 MHz. The resulting wide-band frequency domain data can be used to improve the precision of the distance measurement.
Channel Sounding/UWB Comparison
iSP 20 series - Dual-core Bluetooth 5.3 Modules with Embedded Antenna
ISP2053
Its powerful Dual-core Cortex™ M33 CPUs combined with an optimized antenna offers the perfect solution for High-end Bluetooth connectivity ...
LEARN MORE >
iSP 15 - 18 - 19 series - Built-in Antenna Bluetooth 5.1 Long Range and Direction Finding Modules
ISP1907-HT
The smallest and most powerful multi purpose module suitable for BLE Long Range, Thread, Zigbee, Mesh, Direction Finding and High Temperature applications...
LEARN MORE > ISP1907-LL
Low cost version of this small module available with BLE Long range for simple applications ...
LEARN MORE > ISP1807-LR
The smallest and most powerful BT Long Range module, suitable for Mesh, Zigbee, Thread, ideal for sophisticated applications ...
LEARN MORE >
ISP1507-AX
Best seller mid range BT5 module offering smallest size without performance compromise in 8 x 8 x 1 mm LGA ...
LEARN MORE >
iSP 13 series - BLE 4.1 & BLE 4.2 Modules - Discontinued
ISP1302-BM
DISCONTINUED - The lowest cost Bluetooth Low Energy BLE 4.2 Module, whilst still benefiting from Insight SIPs miniature module technology ...
LEARN MORE >
ISP130301-BM
DISCONTINUED - The perfect balance of power and performance at a competitive price for your Bluetooth Low Energy BLE 4.2 Applications ...
LEARN MORE >
ISP130301-BL
DISCONTINUED - The biggest memory size for more complex BLE 4.2 Applications in a 8 x 11 mm LGA package ...
LEARN MORE >
iSP 09 series - BLE 4.0 Modules - Discontinued
ISP091201-BN
DISCONTINUED - The ideal choice for customers who want to add radio connectivity to an existing application ...
LEARN MORE >
Demo Sensors and Beacons
ISP1880
Miniature Long Range Bluetooth 5 Wireless Accelerometer, Magnetometer, Humidity, Temperature and Barometer Sensors based on ISP1807-LR ...
LEARN MORE >
ISP131001
Miniature multi sensors for Motion detection and transmission applications based on ISP130301 module ...
LEARN MORE >
ISP140501
Smart Beacon for application requiring sensitive location information based on ISP130301 module ...
LEARN MORE >
Additional Information About Bluetooth Low Energy (BLE)
Bluetooth Low Energy (BLE) is a cutting-edge wireless personal area network technology designed to facilitate easy communication between devices over short distances. Unlike classic Bluetooth, BLE is engineered to provide low power consumption and cost-effectiveness, making it an ideal choice for applications that require wireless connectivity without the need for high data transfer rates. This makes BLE particularly suitable for Internet of Things (IoT) devices, wearables, and other low-power applications. With its ability to maintain efficient data transfer while minimizing power consumption, Bluetooth Low Energy is revolutionizing the way devices connect and interact in our increasingly wireless world.
Key Features and Benefits of Bluetooth Low Energy Modules
Our Bluetooth Low Energy modules are renowned for their compact size, high efficiency, and energy-saving capabilities, making them a preferred choice for a wide range of applications. Here are some of the key features and benefits:
- Low Power Consumption: Designed to consume minimal power, Bluetooth Low Energy modules are perfect for battery-powered devices, ensuring prolonged battery life.
- Cost-Effective: Compared to other wireless technologies, Bluetooth Low Energy modules are relatively inexpensive, making them accessible for various applications.
- Small Form Factor:, With our advanced System-in-Package design, our modules are ideal for integration into small devices without compromising performance.
- Wireless Connectivity: Bluetooth Low Energy modules enable seamless wireless connectivity, allowing devices to communicate without the need for cumbersome cables.
- Fully Certified: Our modules are fully certified for global markets, allowing customers to get to market faster and avoid this time consuming and expensive process
These features make Bluetooth Low Energy modules an excellent choice for developers looking to create innovative, energy-efficient wireless devices.
Applications of Bluetooth Low Energy Modules
Bluetooth Low Energy modules are incredibly versatile and find applications across a broad spectrum of industries. Some of the most common uses include:
- IoT Devices: From smart home devices to industrial sensors, Bluetooth Low Energy modules are a staple in the Internet of Things ecosystem, providing reliable and efficient wireless connectivity.
- Wearables: Fitness trackers, smartwatches, and wireless headphones all benefit from the low power consumption and compact size of Bluetooth Low Energy modules.
- Consumer Electronics: A wide range of consumer products such as fitness machines, musical instruments and computers often incorporate Bluetooth Low Energy modules to enhance connectivity and user experience.
- Industrial Applications: Bluetooth Low Energy modules offer robust and reliable performance in industrial settings, including automation systems, medical devices, and various sensors.
- Medical Electronics: Many medical devices incorporate Bluetooth Low Energy modules to enable data sharing across medical teams and enhance productivity and reliability
The adaptability and efficiency of Bluetooth Low Energy modules make them indispensable in modern technology.
Security Considerations for Bluetooth Low Energy Modules
While Bluetooth Low Energy modules offer numerous advantages, they also come with security challenges that need to be addressed. Key security considerations include:
- Authentication: Ensuring that only authorized devices can connect is crucial for maintaining secure communication.
- Encryption: Bluetooth Low Energy modules use encryption to protect data transmitted between devices, safeguarding sensitive information.
- Secure Pairing: Implementing secure pairing mechanisms helps prevent unauthorized access and ensures that devices connect safely.
- Secure Update and Root of Trust: Our advanced Bluetooth Low Energy modules include features such as ARM Trustzone, and secure key storage to ensure an end to end authentication for data transfer and application update.
By addressing these security considerations, developers can ensure that Bluetooth Low Energy modules provide not only efficient but also secure wireless connectivity.
Future Developments in Bluetooth Low Energy Technology
The evolution of Bluetooth Low Energy technology continues to bring exciting advancements. Future developments are expected to include:
- Increased Data Transfer Rates: Upcoming Bluetooth Low Energy modules are anticipated to support higher data transfer rates, enabling faster and more efficient communication between devices.
- Improved Security: Enhanced encryption and secure pairing mechanisms will further bolster the security of Bluetooth Low Energy modules, protecting against emerging threats.
- Extended Range: Future modules are likely to offer increased range, allowing devices to communicate over longer distances without compromising performance.
- Better Power Consumption: Innovations in power management will lead to even lower power consumption, extending the battery life of devices using Bluetooth Low Energy modules.
As always, Insight SIP's cutting-edge Bluetooth Low Energy technology is constantly evolving to embrace these advancements which not only help to enhance our product offerings but also allows us to lead the way in the future of wireless connectivity.
Related Information & Products
BLUETOOTH MODULES
Short Range & Low Energy
WI-FI 6 MODULES
Short Range & Low Energy
LORA MODULES
Low Power Wide Area network
UWB & AOA MODULES
Positioning
