Bluetooth 5 - ISP1807 High Performance Combo Module

Long Range Bluetooth 5 / THREAD / ANT+ / NFC / Low Energy Module with MCU and Antenna

      

Features | Applications | Block Diagram | Main Specifications | Product User Guide | Dev Zone

Features

This miniature BLE module by InsightSIP, based on the nRF52840 chip from Nordic Semiconductor represents the state of the art in Bluetooth 5 Long Range Module Technology. At 8x8x1 mm, we believe this is the smallest fully integrated Bluetooth Low Energy module on the market. It offers a Bluetooth 5 stack including long range, high throughput, advertising extensions and improved coexistence, in addition with IPv6 connectivity, Mesh capabilities, and thus can form the hub of IOT (Internet of Things) solutions.

With an M4 floating point processor, the ISP1807 Bluetooth Smart Module is able to do fast calculations, and run advanced calculations, and with a large memory capacity, is able to support sophisticated applications. The ARM Cryptocell-310 on-chip co-processor offers security and cryptographic functions, saves CPU processing time and reduces energy consumption. In many cases, this module can eliminate the need for an additional microprocessor and/or additional memory that might have been necessary for previous generation products, saving cost of the total solution.

This increased computing capability comes coupled with best-in-class battery life, with power consumption around 20-50% lower than previous generations of technology, (depending on the exact use-case), making this Bluetooth Low Energy / BLE module without compromise.

The addition of integrated NFC touch-to-pair capability adds a further feature that would have previously required additional components. ISP1807 is also supporting additional protocols like ANT+, THREAD and Nordic 2.4 GHz proprietary protocol.

With its tiny size, high performance and wide feature set, the ISP1807 BLE Module truly represents a case where “less is more”. It is the ideal choice where solutions require complex applications, fast processing and/or best in class power consumption. Thanks to pin to pin compatibility with ISP1507, it also provide an easy upgrade of already designed applications.

Applications

  • Advanced Wearables: watches, fitness devices, wireless payment wearables, connected health, augmented reality applications …
  • Smart Home sensors and controllers
  • Industrial IoT sensors and controllers
  • Advanced remote controls
  • Remote & Gaming controllers
  • Beacons

Block Diagram


This module is based on nRF52 Nordic Semiconductor System on Chip (SoC). It can support BLE, THREAD, ANT/ANT+ and a range of proprietary 2.4 GHz protocols. An NFC Tag is available for OOB pairing. Free qualified BLE stacks for nRF52840 are implemented in the S140 SoftDevices and enable ISP1807 to be used in Central, Peripheral, Observer or Broadcaster with up to 20 connections.

Main Specifications

  • Single Mode BLE 5 Ready
  • 2.4GHz Ultra Low Power RF Transceiver
  • Full Bluetooth 5 – long range stack
    ANT/ANT+ stack 2.4 GHz
    proprietary stack
  • Mesh and Thread available
  • NFC-A Tag for OOB pairing
  • Fully integrated RF matching and Antenna
  • Integrated 32 MHz & 32kHZ Clock
  • DC/DC converter with loading circuit
  • Based on Nordic Semiconductor nRF52
  • 32-bit ARM Cortex M4F CPU
  • ARM CryptoCell 310
  • 1 MB Flash / 256 kB SRAM
  • Configurable 46 GPIOs including 8 ADC
  • Many interfaces USB, SPI, UART, PDM, I2C
  • Single 1.7 to 5.5 V supply
  • Very small size 8.0 x 8.0 x 1.0 mm
  • Temperature -40 to +85 °C
  • Pin to Pin compatible with ISP1507

  • Operating Conditions
    • Supply voltage 1.7 to 5.5 V
    • Temperature range -40 to +85°C
  • Power Consumption
    • Peak current, Rx active 5.4 mA
    • Peak current, Tx @0dBm 4.9 mA
    • Peak current, Tx @+8dBm 14.1 mA
    • Deep sleep current 0.4 µA
  • Clock Sources
    • Internal HF clock, 32 MHz crystal
    • Internal LF clock, 32.768 kHz crystal
    • Frequency tolerance +/- 40 ppm
  • Radio Specification
    • Frequency range 2360-2500MHz
    • Max Output Power +8 dBm
    • Rx sensitivity -103dBm
    • Antenna gain 0.6 dBi
    • Range open field  few 100 m
    • Data rate up to 2 Mbps

Product User Guide

  • Ordering Information
    • ISP1807-AG-ZZ
      BLE & ANT protocol, 1 MB flash, 256 kB RAM
  • Prototype Packaging (ZZ = ST)
    • Delivered in unsealed standard trays or cut tapes
    • Please bake the module before assembly
  • Jedec Trays (ZZ = JT)
    • Delivered in sealed packaging
  • Tape & Reels
    • Delivered in sealed packaging
    • Multiple of 500 units (ZZ = RS)
    • Multiple of 2000 units (ZZ = R2)

  • Storage
    • Electronic sensitive devices
  • Moisture Sensitivity
    • Level MSL-5
    • Bake 24 hours at 125°C if module stored at ambient room
  • Soldering Information
    • According to Jedec J-STD-020
    • Maximum peak temperature
      260°C / 30 sec

CONTACT US

Insight SiP
GreenSide, Bat.7, Entree2,
400 Avenue Roumanille, BP 309
F-06906 Sophia–Antipolis FRANCE

Phone: +33 (0) 493 008 880

OFFICE

NEWSLETTER

Stay tuned with our latest news!
captcha