ISP1880 BLE Multi Sensor
Long Range Bluetooth 5 Wireless Accelero-Magnetometer, Humidity, Temperature and Barometer Sensor
- Bluetooth v5.0 - 2.4GHz low energy RF Transceiver
- Based on Insight SiP 1807-LR Module
- 32bit ARM Cortex M4F CPU with 1MB Flash and 256KB RAM
- Fully integrated RF matching and Antenna
- Integrated 32 MHz and 32.768 kHz Clocks
- Low Power 3-Axis Accelerometer Detection
- Low Power Temperature/Humidity Detection
- Low Power Barometer Detection
- Programmable controlled mini LED
- USB port interface
- Power supply on coin cell battery CR2032 or with USB interface
- Temperature -25 to 85 °C
32 x 26.5 mm²
Sensor Description
ISP1880 is an autonomous low-power device for wireless acceleration, temperature, humidity and barometer detection and transmission powered by a button cell battery CR2032. Overall size of the device is 32 x 26.5 mm².
The complete device makes use of Insight SiP ISP1807-LR Long Range BT5 module. The host processor that handles the autonomous sensor application, the BT5 protocol stack and the communication with the sensors is a low power 32-bit MCU (ARM Cortex-M4F based), integrating 1 MB Flash memory and 256 KB RAM.
The ST Micro LSM9DS1 3-axis linear accelerometer and 3-axis magnetometer is used to detect acceleration and is combined with the ST Micro LPS22HB Barometer and the SHTC3 Sensirion Humidity / Temperature sensors. A Rohm SML-P11MTT86 mini-LED is also part of the board and is available to be controlled by software. Data are transmitted via GPIO processor port.
ISP1880
- Accelaration range up to +/- 16 g
accuracy +/- 90 mg - Magnetic range up to +/- 16 Gauss
- Angular rate range up to +/-2000 dps
- Barometer range 800-1100 hPa
accuracy -/-0.1 hPa - Humidity range 0-100 %RH
accuracy +/-2 %RH - Temperature range -25/+85 °C
accuracy +/-0.2 °C
Development Tools
In order to assist clients in developing their Bluetooth Smart solutions based on the ISP1807, Insight SIP offers Test Boards, proposed as stand alone PCBs, or included in Evaluation Boards which provide full hardware and software development environment. Used as stand alone solution, Test Boards also offer test points for all IOs and can be used in conjunction with Nordic Development kits and external J-Link programmers.
Evaluation Board
Contents
- One Interface Board with integrated J-Link OB JTAG/SWD Emulator
- One Test Board of chosen variant
See above for module variant description - Cables
Ordering information
- ISP1807-LR-EB
Test Board
Contents
- One Test board of the chosen variant
See above for module variant description
Ordering information
- ISP1807-LR-TB
Documentation
DATA SHEET - Sensor Board ISP1880
DATA SHEET - Module ISP1807
DATA SHEET - Development Board ISP1807
APPLICATION NOTE - Sensor Board ISP1880
APPLICATION NOTE - Development Board ISP1807
Certifications
Last reports are awaited to complete the certificate links ...
Design Information
SCHEMATIC - Sensor Board ISP1880
GOOGLE PLAY APP - Sensor Demo